aeg condenser dryer (6yrs old)

This topic has 5 replies, 2 voices, and was last updated 19 years, 4 months ago by rocker.

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
December 6, 2006 at 3:17 pm #23153

rocker
Participant

Pnc No 916- sorry only have the first 3 digets, machine sets up ok timer tells there is 55 mins..start machine it runs for about 10 seconds then the timer goes to 0 machine stops. gained access to elements in sealed unit, there are two thermal fuses, one has blown, have bypassed this, but problem still exists.
any ideas please John.

December 6, 2006 at 4:08 pm #197149

Martin
Participant

Re: aeg condenser dryer (6yrs old)

rocker wrote:any ideas please John.

The LAVAMAT model number would really really help John?

Fan motor?, inlet valve coil o/circuit? Does it do a wash cycle OK and is it just the dryer that’s the problem? 😕

Help us out here guy 8)

December 6, 2006 at 4:15 pm #197150

rocker
Participant

Re: aeg condenser dryer (6yrs old)

Martin this is a condenser dryer only, not washer/dryer sorry dont have pnc No

December 6, 2006 at 4:38 pm #197151

Martin
Participant

Re: aeg condenser dryer (6yrs old)

rocker wrote:Martin this is a condenser dryer only, not washer/dryer sorry dont have pnc No

Silly me 😳 ….then what is the LAVATHERM number on the front panel?

…..meanwhile….Float switch?

December 6, 2006 at 5:03 pm #197152

rocker
Participant

Re: aeg condenser dryer (6yrs old)

Martin unable to get info at moment ,as they are away for some time, will
try at later date. thanks for your help.
John

December 6, 2006 at 5:10 pm #197153

Martin
Participant

Re: aeg condenser dryer (6yrs old)

OK no probs!….when you come back with the number, make sure you dig out this thread rather than opening another on the subject…..cheers!
Author

Posts

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.