Bosch D/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch D/w

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 6, 2006 at 7:14 pm #23165
    reaper
    Participant

    Out of curiosity.Late model with removable tin base. Theres a black plastic unit attached to the heater unit with a timer motor on it what is it for?Whenever I attend a Bosch dishwasher its with a mixture of trepidation and wonder.Sorry I forgot to take model no. as it was only a blocked pump-easy peasy not like some of its brothers and sisters.

    December 6, 2006 at 7:18 pm #197184
    Flyman
    Participant

    Re: Bosch D/w

    Think it is a divertor motor to alternate water between the top and bottom spray arms. 🙂

    December 6, 2006 at 7:32 pm #197185
    superfix
    Participant

    Re: Bosch D/w

    Think it is a divertor motor to alternate water between the top and bottom spray arms

    Correct :tup:

    December 6, 2006 at 7:49 pm #197186
    maltheviking
    Participant

    Re: Bosch D/w

    Flyman wrote:Think it is a divertor motor to alternate water between the top and bottom spray arms. 🙂

    And are they trouble, done one today

    December 6, 2006 at 7:52 pm #197187
    maltheviking
    Participant

    Re: Bosch D/w

    As a matter of interest, what’s the going rate for doing one of the heater boxs? If you consider the time removing the machine when it’s built in etc. standing on your head in a small kitchen and the good hour to do it 😥

    December 6, 2006 at 8:00 pm #197188
    superfix
    Participant

    Re: Bosch D/w

    and the good hour to do it Crying or Very sad

    Really, I find these a hundred times easier to change.

    Just lie them on their back and tin base off, easy 8) .

    December 7, 2006 at 12:39 am #197189
    reaper
    Participant

    Re: Bosch D/w

    So whats the symptom when these go wrong. just top or bottom of crockery clean?

    December 7, 2006 at 5:13 pm #197190
    maltheviking
    Participant

    Re: Bosch D/w

    boro wrote:

    Really, I find these a hundred times easier to change.

    Just lie them on their back and tin base off, easy 8) .

    You are right Boro I was getting my models mixed up 😳 I was thinking about the series with the plastic base 😉

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.