prima 854560015810

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › prima 854560015810

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • December 7, 2006 at 2:55 pm #23192
    goody5555
    Participant

    hi i have one of these and its 2 1/2 years old and is a pile of junk
    well thats the mone out of the way
    i have a problem with this dishwasher i hope someone can help me please
    1 dishwasher fills but only 2cm of water ?
    2 then starts to wash but the arms do not spin round water comes out off the holes in arms but dose not spin
    it drains ok with no problems
    i took the sides off to have a look inside and the plastic tank on side dose not seem to fill all the way ?
    the two tanks at bottom one salt and the other looks like a filter? the one thats i think is a filter is a orange colour with black at the top should this be
    checked all pipes and are clear i get no flashing lights or beeps to tell of faults it just goes through the cycle and the pots are not clean
    please help me going crazy
    goody5555

    December 8, 2006 at 12:47 am #197274
    Penguin45
    Participant

    Re: prima 854560015810

    Have a read of this:
    http://www.ukwhitegoods.co.uk/modules.p … ge&pid=159

    Then, decide what you want to do…….

    Regards,
    Penguin45.

    December 8, 2006 at 2:40 pm #197275
    goody5555
    Participant

    Re: prima 854560015810

    ta very much so it needs a new pump urm not happy not very old
    oh and is it easy to fit
    ta goody5555

    December 8, 2006 at 3:19 pm #197276
    Dave_Conway
    Participant

    Re: prima 854560015810

    This post regarding the same part will help:

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=18552

    🙂

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.