- This topic has 3 replies, 2 voices, and was last updated 19 years, 4 months ago by
.
-
Posts
-
MY DISHWASHER IS FLASHING AO5 I NORMALLY GET THE AO1 BUT AFTER READING OTHER USERS HELPFUL ADVICE I TIP IT FORWARD ON AN ANGLE AND DRAIN THE WATER OUT AND HEY PRESTO. BUT THIS ONE STUMPS ME I KNOW THAT IT MIGHT HAVE SOMETHING TO DO WITH THE LEVEL IN THE BOTTOM OF THE MACHINE BUT WHAT DO I DO NOW.THE MACHINE DRAINS AS USUAL WHEN I SET A PROGRAM BUT DOES NOT FILL AND KEEPS MAKING THE DRAINING NOISE, AFTER A MINUTE OR TWO AO5 STARTS FLASHING.I HAVE AN IDEA WITH A SLEDGE HAMMER BUT IF ANYONE CAN HELP ME OUT I WOULD VERY GRATEFUL.MANY THANKS 👿 👿 👿
Re: INDESIT DS73 AO5 FAULT
you got a leak somewhere… thats why its going into antiflood mode
could be from anywhere, or it could be overfilling.. id really have to advise calling someone out to that, its not an easy task
but if u do look, dont work live, always with the power off, of course
MANY THANKS FOR YOUR REPLY, ANY IDEA WHERE I SHOULD START TO LOOK,MACHINE DID OVER FLOW THIS IS OBVIOUSLY THE START OF THE PROBLEM.BUT IT DID DRAIN O.K.I DID TIP AND TILT THE MACHINE TO TRY AND GET THE REMAINDER OF THE WATER OUT,AND I ONLY KICKED IT ONCE……….OR TWICE 😉 😉 😉
TOOK THE BOTTOM OFF THE MACHINE A LITTLE WET BUT NOT SOAKING FOUND THE ANTI FLOOD SWITCH(A POLESTYRENE PIECE WITH THE SWITCH ON IT?)THAT SEEMS FINE,LITTLE ARM JUST RESTING ON THE TOP.EVERY WHERE ELSE LOOKS DRY,BUT THE MACHINE DOES NOT WANT TO FILL :haier: ARE THERE ANY OTHER ANTI FLOOD DEVICES OR COULD THERE BE ANOTHER REASON? 😕 😕
- You must be logged in to reply to this topic.