- This topic has 1 reply, 1 voice, and was last updated 19 years, 4 months ago by
.
-
Posts
-
Hi everybody,
I wonder if somebody can help me with this:
I receive a washing machine Hoover model AE 140 witch have no motor action.
I`ve checked: the motor – ok,
tacho – ok,
but on the pcb I find two resistors burned, in the tacho circuit: one it was a smd resistor witch has 100 ohms, and I replaced.
And the other one it was too much burned, and i cannot find what value it was initiall on that resistor.So I put a 47ohm resistor instead, and the machine work on the final spin (SP4) until get stoped with a “t c c” error.
So can somebody tell me what kind of value got to be used ? 😕Manny thanks,
FlorinRe: Hoover AE 140 – no motor action
So I did this experience:
I put instead that burned resistor a 25kohms variable resistor, set it to a middle value of 12kohms.
And it works verry well.So I replace it with a 12kohms – 1/4 watts, and the motor works perfect. 8)
So I hope it will help: this kind of module-timers does not let the motor to work, if the tacho circuit is burned… 😉Cheers,
Florin
- You must be logged in to reply to this topic.