- This topic has 3 replies, 3 voices, and was last updated 19 years, 4 months ago by
.
-
Posts
-
Hello folks
My trusty Bosch dishwasher has decided to give me some grief and the handle has broken 🙁
Luckily i managed to order a new one from the links on this web site and am now just awaiting its arrival.
My question is this…
How do I go about changing the handle 😳
I am sure it will be pretty straight forward i.e take front panel off etc but I thought I would ask first in case there is an easier way.
Any info would be most appreciated.
Thanks
Re: Bosch SPS5462GB/18 Handle Replacement
Looking up into the handle aperture, insert new handle upwards at about 45 degrees, ensuring that the end tongues locate into the slots at the ends of the carrier. Then lift up to the horizontal position – it should “click” into place. If it takes more than 30 seconds, you’re doing something wrong 😀 . No dis-assembly required.
Regards,
Penguin45.Re: Bosch SPS5462GB/18 Handle Replacement
Many thanks Penguin45 for the reply.
Looks as though half of the original handle is still stuck in place – only the main flat part of the handle has broken off (typical eh) – not sure how I will manage to remove the old part without taking the panel off.
As usual nothing straight forward 😆
Many thanks
- You must be logged in to reply to this topic.