Beko (prewash light flashing?)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko (prewash light flashing?)

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • December 12, 2006 at 9:33 pm #23331
    superspin
    Participant

    hi all

    i was called out to a beko wma1715s washingmachine today the fault
    was the prewash light keeps flashing, the door will lock but nothig elese.
    turn the programme selector and each one lights. cant reset or cancel.
    could this be the modual on the right hand side.

    thanks for any replies.

    December 12, 2006 at 10:16 pm #197771
    bobokines
    Participant

    Re: beko

    I think the prewash light flashing is a time out on fill.

    Bob

    December 13, 2006 at 12:26 am #197772
    robbra
    Participant

    Re: beko

    Prewash light flashing normally means the module is u/s
    Rob

    December 13, 2006 at 12:44 am #197773
    Penguin45
    Participant

    Re: beko

    I’m with Rob.

    Chris.

    December 13, 2006 at 8:24 am #197774
    Washman
    Participant

    Re: beko

    Hi

    Flashing pre wash LED or flashing start/cancel button on WMA1715 BEKO

    Turn power off (not at wall )
    Select 90 degree wash
    Press start and cancel button down at same time for 3 seconds and turn power button on whilst still holdingbuttons down– Start light will flash.
    Leave power on
    Select any spin position
    Press start and cancel button at same time again for 3 seconds–other buttons may flash-if they do press start and cancel buttons again for 3 seconds
    machine should be reset ready for use


    Mike

    December 13, 2006 at 8:34 am #197775
    robbra
    Participant

    Re: beko

    Hi Mike,
    Tried this and never got it to work but will keep on as it’s an easy call when it does
    Rob

    December 28, 2006 at 12:53 pm #197776
    Alanj
    Participant

    Re: Beko (prewash light flashing?)

    Hi Rob,

    had one of these today with prewash flashing. To reset I held start/pause button down whilst switching on machine. Found that motor plug had been disconnected, possibly by vibration or heavy load. Problem solved.

    Alan

    December 28, 2006 at 5:39 pm #197777
    superspin
    Participant

    Re: Beko (prewash light flashing?)

    hi allen

    regarding my original post, this also turned out to be the motor plug
    one wire had come away from plug.

    thanks for your replies.


    Wayne.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.