Zanussi ZWF1631W foult code 90 ?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF1631W foult code 90 ?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 18, 2006 at 9:02 pm #23475
    steveDAS
    Participant

    can any one till me on Zanussi ZWF1631W what f90 code is + some times blown electric trip switch . i cant find any foult

    December 18, 2006 at 10:22 pm #198258
    Alan1476
    Participant

    Re: Zanussi ZWF1631W foult code 90 ?

    Hi there
    the E90 fault is loss of communication between user interface pcb and main pcb. Easly fixed by removing the blue lead from the main pcb and inserting it a couple of times, sometimes you get a bad connection which will give you this fault. I normaly change the blue lead as a matter of course anyway. As for blowing the trip have you checked for any earth leakage. Motor if favourate on this type of machine. Normaly with a fault like yours the customer normaly complaines the they cant select a prog.
    Hope to have been skome help. 🙂

    December 18, 2006 at 11:18 pm #198259
    steveDAS
    Participant

    Re: Zanussi ZWF1631W foult code 90 ?

    yep checked motor and heater but looks like I go back and check the lead so i check motor brushes at same time . Been doing this over 25 years and i can still get caught out .

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.