- This topic has 1 reply, 2 voices, and was last updated 19 years, 3 months ago by
.
-
Posts
-
I was wondering if any one could point me in the direction of the wiring diagrams for an Ariton Margherita A1435 Advantage.
My problem is that every so often (Not all the time) it will stop mid cycle and the dial will click round and round with the light flashing 5 times, however it does not do it every time and when it does do it more often that not I can put it on the dot and reset the machine and then put it back onto the end of the right i.e. either the rinse or spin and it might finish.
I would like the wiring diagram so that I can check the wires connecting the pressure switch and other components and resistance in the connections.
Any help would be great.
Thanks
MattRe: wiring diagram for Ariston Margherita
Please read this with regard to wiring diagrams. http://tinyurl.com/o5mq6
5 flashes indicates that the pressure switch is stuck on full or not resetting.
Check the pump filter for any obstructions, does the machine appear to be draining correctly? The fact that it sometimes works after resetting suggests a possible blockage or obstruction to the drain system
Can also be caused by a faulty pressure switch or gunge in the thin pressure hose leading to this switch.
Plug out at all times when you have your hands inside.
Jim.
- You must be logged in to reply to this topic.