Any tips to remove Dyson CR01 motor?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Any tips to remove Dyson CR01 motor?

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 3, 2007 at 10:10 am #23776
    andy_art_trigg
    Participant

    I decided to check the carbon brushes on my Dyson CR01 washing machine last night while removing it to install my new dishwasher. I gave up after 10 mins. Only two star screws holding it on, the 3rd bracket just slides over the plastic mount as with Hotpoint. The motor just wouldn’t budge a millimeter and all my attempts to lever it off just damaged the plastic mounts.

    If I had to get the motor off I’d have persevered a bit more but it was just a service-type check. Anyone else had problems?

    January 4, 2007 at 11:29 am #199337
    happycack
    Participant

    Re: Any tips to remove Dyson CR01 motor?

    Had a word with a friend of mine that works for Dyson. Special pullig tool about 3 foot long!
    That would explain it, hope that helps.

    January 4, 2007 at 11:35 am #199338
    andy_art_trigg
    Participant

    Re: Any tips to remove Dyson CR01 motor?

    Cheers. That certainly does explain it, and its much better than the other implied explanation that I am past it. 🙂

    If I’d known you need a special tool just to get the motor off I wouldn’t have praised it so highly in my review.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.