Electrolux WM 1000A

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Electrolux WM 1000A

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 5, 2007 at 9:37 am #23864
    WhiteVanMan1
    Participant

    Problem = No spin. Motor is erratic in movement as it goes through cycle then just won’t spin. Filter is clear and pumping out fine. Any ideas before I order a module? Cheers

    January 5, 2007 at 1:47 pm #199622
    Alanj
    Participant

    Re: Electrolux WM 1000A

    Whitevanman,

    have you tried checking the tacho magnet on the end of the motor?These quite often come loose and cause this. You might have to remove cover on top of tacho to check.

    Alan

    January 6, 2007 at 1:16 am #199623
    WhiteVanMan1
    Participant

    Re: Electrolux WM 1000A

    Cheers Alan, Will check that one and let you know. Steve

    January 7, 2007 at 6:01 pm #199624
    keithwilliams
    Participant

    Re: Electrolux WM 1000A

    i’ve just had same fault on bendix aw1000w it turned out to be the timer which cost £54 from masterpart. a mate of mine has come across this a few times. basically the motor does the distribute then just as it should kick in to spin it dies.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.