Hotpoint wma 33 no motor action

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint wma 33 no motor action

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • January 9, 2007 at 10:48 am #23963
    allan
    Participant

    Hi all, just been to hotpoint wma33 with no motor action at all, (it had a new motor fitted about 3 months ago) checked motor which seems fine checked for earth problems heater etc checked all cable connections to motor and control board etc, thinking new board any other thoughts on this before I order
    Thanks Allan

    January 9, 2007 at 10:55 am #200012
    Martin
    Participant

    Re: Hotpoint wma 33 no motor action

    Wiring harness break under drum, module gone phut?

    January 9, 2007 at 10:58 am #200013
    allan
    Participant

    Re: Hotpoint wma 33 no motor action

    checked harness so suspect module

    January 9, 2007 at 11:23 pm #200014
    iadom
    Moderator

    Re: Hotpoint wma 33 no motor action

    Try the ‘Last Error detected’ test routine, this can be found on page #3 in the Known Error Codes thread at the top of this forum, it may confirm a faulty triac on the board.

    Jim.

    January 10, 2007 at 10:22 am #200015
    allan
    Participant

    Re: Hotpoint wma 33 no motor action

    Thanks Jim I will try that

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.