belling oven

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › belling oven

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 9, 2007 at 7:09 pm #23978
    fasetester
    Participant

    hi guys i went to see a belling oven which needs a new fan element the problum is you cant read the mob no as the paper is wore away it is a round 2 ring element with treaded studs on the mounting plate the plate mounts on the right hand side it is a belling synergie and it is stainless steel and black and about 2 and half yrs old could any one tell me what is the model number or show me what type of element i need and the cost as the want to know the price thanks fasetester 😕

    January 10, 2007 at 4:06 am #200062
    WhiteVanMan1
    Participant

    Re: belling oven

    Could be XOU 90

    January 10, 2007 at 8:25 am #200063
    Martin
    Participant

    Re: belling oven

    fasetester wrote:hi guys i went to see a belling oven which needs a new fan element

    With elements it’s always best to measure the diameter, the fixing spacing between the terminals or better still hook the element out get its rating and use a comparison chart (Qualtex, SEME etc)

    The 3 most common Qualtex elements to fit Belling are:

    ELE001 = 2250w
    ELE049 = 1750w
    ELE2048= 2000w

    Hope that helps? 😉

    January 10, 2007 at 12:01 pm #200064
    fasetester
    Participant

    Re: belling oven

    thanks white van man and martin for you reply the only info i have from another supplyer is a element for synergie range belling elesv02 it looks like the element. from the fixing studs on the plate its measurment is5.7cm and from the bottom of the element to the top of the fixing plate it is 22cm and the in side is 19.8cm i checked around the oven but the only place i could see for the model number was inside the door but it had burned away if it says for the synergie range of oven would it not be the right element and if i were to remove the element to check the measurments and insulate the connections would the rest of the oven work ok until i completed the repair thanks. fasetester 😕

    January 10, 2007 at 2:24 pm #200065
    Martin
    Participant

    Re: belling oven

    fasetester wrote:would the rest of the oven work ok until i completed the repair thanks. fasetester 😕

    Probably…? :con:

    Is it one of these I wonder? : –

    ELE001………………………………..ELE049……………………………………….ELE2048

    January 10, 2007 at 4:58 pm #200066
    fasetester
    Participant

    Re: belling oven

    hi martin it looks like the third one with the treaded mountings ele 2048 thanks. fasetester what price is the element 🙂

    January 11, 2007 at 2:23 pm #200067
    Martin
    Participant

    Re: belling oven

    fasetester wrote:hi martin it looks like the third one with the treaded mountings ele 2048 thanks. fasetester what price is the element 🙂

    Best you ask Qualtex fasetester. 😉

    By the way, I moved the thread to Trade Spares from Trade Tech…

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.