Bosch DW overfilling?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch DW overfilling?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 9, 2007 at 7:44 pm #23982
    EFS
    Participant

    Bosch SGS 5434A 52/GB/35
    Seems to do the program OK but with far too much water in the tank.
    All pipes are clean and the pressure switch is working.
    Does initial fill,starts motor then continues to fill whilst washing and keeps on filling after pressure switch operates again.
    Overfill almost comes in before fill stops.
    Any advice appreciated

    Steve

    January 10, 2007 at 12:45 am #200075
    Penguin45
    Participant

    Re: Bosch DW overfilling?

    Can’t find anything for that number, Steve – want to re-check? Timer or digital BTW?

    Chris.

    January 10, 2007 at 1:15 am #200076
    gegsy
    Participant

    Re: Bosch DW overfilling?

    Hi Steve
    Blimey mate, you should stick to non alcoholic drinks in the day 😆
    I reckon the model is SGS43A52GB/35 😕
    They do fill and continue to fill a bit after recirculation has activated.
    As long as the water level is below the lower spray arm spigot, then that is fine.
    Failing that iti s quite possibly the module (490049) it has had a part change hence software change maybe(AFAIR they are timed fill from the module), pressure chamber (482936) or lazy fill valve not closing efficiently.


    Greg

    January 10, 2007 at 8:33 am #200077
    EFS
    Participant

    Re: Bosch DW overfilling?

    gegsy wrote:Hi Steve
    Blimey mate, you should stick to non alcoholic drinks in the day 😆

    Well it was 9.45 and I couldn’t find me glasses 🙂

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.