Bosch WF02865GB. Spin probs.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch WF02865GB. Spin probs.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • January 15, 2007 at 3:09 pm #24146
    megawatt
    Participant

    Select spin + start. Starts with 11 mins to go and counts down with slow spin to 6. Then jumps to 1 missing fast spin.
    Sounds like the module to me. any one else got any inspiration on this before I quote for a module.
    Regards,
    Mike.

    January 15, 2007 at 4:53 pm #200850
    gegsy
    Participant

    Re: Bosch WF02865GB. Spin probs.

    Hi
    Brushes worth a check and/or dry joint/s on pcb.
    To check motor for correct readings these are typical readings-

    On motor itself between –
    Pins 1-3.. 0.8 – 1.2 ohms
    Pins 2-3..0.8 – 2 ohms
    Pins 4-5..1.8 – 10 ohms
    Pins 6-7..14 – 240 ohms


    HTH

    Greg

    January 15, 2007 at 6:07 pm #200851
    megawatt
    Participant

    Re: Bosch WF02865GB. Spin probs.

    Thanks for the reply Greg. I was called in for a no spin fault due to duff carbons which I have replaced. The owner has lived with this for a while. Motor seems ok on wash and spin start.
    Mike.

    January 15, 2007 at 6:15 pm #200852
    gegsy
    Participant

    Re: Bosch WF02865GB. Spin probs.

    Hi Mike
    It does sound like a module fault.
    Do you know if its a GB/01 or GB/08 ?

    Greg

    January 15, 2007 at 7:29 pm #200853
    Bryan
    Participant

    Re: Bosch WF02865GB. Spin probs.

    Martin posted a very similar fault on a very similar machine last week
    http://www.ukwhitegoods.co.uk/modules.p … ic&t=20934

    We have a Siemens WXL147AGB/18 (again very similar) at home and don`t know if this is significant but my wife reliably informs me that a seperate spin cycle counts down from 6 mins to zero.

    Does sound more and more like the module but it`s an expensive gamble to get wrong.

    Bryan

    January 15, 2007 at 10:36 pm #200854
    megawatt
    Participant

    Re: Bosch WF02865GB. Spin probs.

    GB/08 Greg.
    Very interesting link, looks like Martin had a similar problem. I”ll go back and hope for a dry joint. Thanks for the input guys, I”ll let you know .

    January 15, 2007 at 11:02 pm #200855
    gegsy
    Participant

    Re: Bosch WF02865GB. Spin probs.

    Hi Mike
    If you should need module it is p/no 445555 @ £93.20+ charges retail.

    Greg

    January 16, 2007 at 1:52 pm #200856
    WhiteVanMan1
    Participant

    Re: Bosch WF02865GB. Spin probs.

    I had this problem a couple of weeks back and it was a duff commutator.

    January 16, 2007 at 7:14 pm #200857
    megawatt
    Participant

    Re: Bosch WF02865GB. Spin probs.

    Checked board for dry joints and quoted for new module. m/c scrapped, so I have a motor and module with a 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} chance of a fault. Thanks for your comments,
    Mike.

    January 16, 2007 at 9:16 pm #200858
    helo_75
    Participant

    Re: Bosch WF02865GB. Spin probs.

    i thought they were supposed to do that?

    as far as i was aware (and if you read the instruction manual) when you put the machine on a spin only program, it will default to a gentle spin.. its not a fault, its a feature, itll only actually do a full spin after a full program, which is a bugger to test.

    i rang bosch tech about that issue, and thats the answer i got

    if it aint doin fast spin after a full cycle, its either out of balance, or the pcb is faulty

    hope this helps

    hlo_75

    January 16, 2007 at 10:33 pm #200859
    megawatt
    Participant

    Re: Bosch WF02865GB. Spin probs.

    Thanks for your input Helo. I ran a full load on a full wash cycle and it still failed. Going to be hard to get the module back in as I took it out with a pair of snips. I think we’ve passed the point of no return.
    Regards,
    Mike.

  • Author
    Posts
Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.