Bosch/Siemens carbons

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch/Siemens carbons

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 15, 2007 at 6:16 pm #24153
    Alanj
    Participant

    Hi Guys,

    anyone know the part number for the carbons with the silver tag that is slightly smaller than BSH154740 carbon with brass tag.

    Thanks
    Alan

    January 15, 2007 at 6:24 pm #200877
    gegsy
    Participant

    Re: Bosch/Siemens carbons

    Hi Alan
    Are these to fit motors which have an end cap?also do you have a rough model number just to make it easier 😀

    Thanks

    Greg

    January 15, 2007 at 7:09 pm #200878
    Alanj
    Participant

    Re: Bosch/Siemens carbons

    Hi Greg,

    not for end cap motors just the carbons with the tag and spring.
    Don’t have a model number for fitting, it was for stock.

    Alan

    I would have uploaded a pic but have not mastered this task.

    January 15, 2007 at 7:13 pm #200879
    Alanj
    Participant

    Re: Bosch/Siemens carbons

    Greg

    I’ve e-mailed pic.

    Alan

    January 15, 2007 at 10:52 pm #200880
    nationalhomecare
    Participant

    Re: Bosch/Siemens carbons

    Hi Alan
    You may find that the tag on the patterned brushes are silver and slightly smaller? (Qualtex car93), but the BSH154740 should be the same as these and interchangable.
    BSH also used a motor that operated with AEG type carbons too,(some WFF2001 and WFR2800 variants)
    The only other one I wondered was the spanish produced WFB series and such like but have never had cause to fit brushes to one.
    HTH 😉
    Steve

    January 16, 2007 at 4:11 pm #200881
    wilf
    Participant

    Re: Bosch/Siemens carbons

    try car48

    wilf

    January 22, 2007 at 3:04 pm #200882
    Alanj
    Participant

    Re: Bosch/Siemens carbons

    Hi Guys,

    I managed to find what I was looking for eventually 😀 . Connect stock them as CBN9121 @ £2.99/pr. Thanks for your efforts :scot: .

    Alan

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.