Indesit D61 Won’t stop cycling

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Indesit D61 Won’t stop cycling

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 18, 2007 at 11:07 am #24246
    bazloor
    Participant

    Hi there,

    I hope someone can point me in the right direction. I woke this morning to find that my Indesit D61 had been on all night and just continually moving on to the next cycle. I tested this out by selecting a rinse, and sure enough, once complete it moved directly onto an intense wash, which is the next on the dial. I am assuming I need an new selector/controller, but hoped someone could shed some more light on the matter just in case.

    Many thanks, Barry.

    January 18, 2007 at 5:11 pm #201282
    Fairdeal
    Participant

    Re: Indesit D61 Won’t stop cycling

    Hi Barry,

    Is it draining the water out properly? If you turn the knob manually does it drain?

    Sometimes If it cannot empty the water out then it will give you all sorts of problems.

    Regards

    January 18, 2007 at 7:24 pm #201283
    bazloor
    Participant

    Re: Indesit D61 Won’t stop cycling

    Hi, thanks for the reply.

    Got in from work to find that it is not draining the water at all. Sounds like this could be the problem. Any clues about what I can do from here? How can I drain the water manually?

    Thanks for any advice!

    January 18, 2007 at 8:13 pm #201284
    Fairdeal
    Participant

    Re: Indesit D61 Won’t stop cycling

    Well what you do is take the drain pipe out from the sink(where it connects to the waste trap)If you have this kind of plubing though.

    Put that in a bucket and then drain the water out to see if it drains.Sometimes it is just blocked at that point so worth checking and see how it goes.

    Regards

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.