PROLINE PDW 080

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › PROLINE PDW 080

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • January 19, 2007 at 9:52 pm #24294
    bib
    Participant

    SLIMLINE PROLINE UNIT, LOOKS AS IF COULD B INDESIT 😥

    NOT GOING THRO CYCLE WOULD APPEAR NOT 2 B HEATING, HEATER OK , STAT INLINE WITH HEATER O/C , IS THIS CORRECT ?OR SHOULD BE N/C ME THINKS

    THANKS 4 ANY HELP

    January 19, 2007 at 10:15 pm #201485
    iadom
    Moderator

    Re: PROLINE PDW 080

    Not listed on Partfinder, probably not Indesit.

    Jim.

    January 20, 2007 at 12:03 am #201486
    helo_75
    Participant

    Re: PROLINE PDW 080

    yep, that stats faulty, its common that… give it a tap with a screwdriver, it sometimes resets it

    its not an indesit that one

    January 20, 2007 at 12:31 am #201487
    Penguin45
    Participant

    Re: PROLINE PDW 080

    Haier………..

    January 20, 2007 at 8:44 am #201488
    Lawrence
    Participant

    Re: PROLINE PDW 080

    I watched a comet engineer fix one of these on Tue whilst I was doing a bearing change on a Servis in the same house ,It is an indesit and it was the same sympton and it was wire burnt of a pigy back on one of the pump terminals
    Lawrence

    January 20, 2007 at 11:46 am #201489
    bib
    Participant

    Re: PROLINE PDW 080

    THANKS EVERYBODY I WILL SEE IF I CAN SOURCE A NEW ONE 😀

    January 20, 2007 at 11:55 am #201490
    euro
    Participant

    Re: PROLINE PDW 080

    Its a Naiko, put that model number into Connect and all the parts come up for it

    Andy

    January 20, 2007 at 12:39 pm #201491
    funkyboogy
    Participant

    Re: PROLINE PDW 080

    indesit one will do, ive fitted lots of them…
    part c00041086…
    ally

    January 20, 2007 at 2:54 pm #201492
    helo_75
    Participant

    Re: PROLINE PDW 080

    erm, i am a comet engineer 🙂

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.