wma34 no spin

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › wma34 no spin

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 20, 2007 at 6:36 pm #24313
    machineman
    Participant

    had customer on today he has changed carbons and pressure switch but still no spin .he has tried it empty -washes but no spin .m

    January 20, 2007 at 7:39 pm #201551
    iadom
    Moderator

    Re: wma34 no spin

    He obviously needs a visit from someone who has the expertise to fix it. 😉

    First try the last recorded error test, then its time for visual/electrical examination of all wiring/components, then its try a module time. 🙂

    The real problem is, what else has he done. 😥

    Jim.

    January 21, 2007 at 1:23 pm #201552
    admin
    Keymaster

    If he replaced presure switch perghaps he changed two wires between them selves (those who goes to empty stat and for heater and both goes to main board).

    January 22, 2007 at 9:07 pm #201553
    machineman
    Participant

    Re: wma34 no spin

    any1 got the wiring diagram for pressure switch and how do u get into test and last error mode??

    January 22, 2007 at 9:18 pm #201554
    admin
    Keymaster

    For test: read “Known Error Codes” at page3 thirth post

    January 22, 2007 at 10:26 pm #201555
    iadom
    Moderator

    Re: wma34 no spin

    Check your e-mail. 😉

    Jim.

    January 22, 2007 at 10:44 pm #201556
    machineman
    Participant

    cheers for that .m

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.