whirlpool timer fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › whirlpool timer fault

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • January 23, 2007 at 1:26 pm #24414
    abbots
    Participant

    hi guys,

    WPL AWM1203
    857022215330
    Sn. 410327009162

    the machine will not do a fast spin program.
    if you put it on prog. no. 2(fast spin) it will advance straight to program 3(slow spin).
    if you put it on a rinse and spin(prog. 1) it will fill ,rinse ,empty ,then when it comes to do a fast spin it will advance straight to program 3(slow spin).
    no obvious burning on the timer.
    the slow spin seems perfect.
    carbons seem fine.

    any ideas?
    thanks.
    jk

    January 23, 2007 at 9:34 pm #202000
    Alanj
    Participant

    Re: whirlpool timer fault

    Hi jk,

    is the adaptor between the timer knob and timer spindle ok.The adaptor locates into the timer knob to select program.If it’s broken it might not be selecting the correct program.You will have to remove consul front to check.

    Alan

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.