- This topic has 6 replies, 4 voices, and was last updated 19 years, 2 months ago by
.
-
Posts
-
Just looked on error codes page & 4 flashes shows also ”water indicator fault” whats one of them? soz for the ignorance 😳 .
Chris..Re: Whirpool ADP 4501/5 4 flashes.
probibly has an optical water indicator in the sump (round plastic thing)
try cleaning that & make sure the spray arms are clear.Re: Whirpool ADP 4501/5 4 flashes.
Hi Chris
If you remove the filters, the WI will be at the 3 oclock position.
It can be either clear round plasic looking with raised nodule or most common, round with a honeycomb grill/mesh.The honeycomb one tends to get clogged with crud and can be easily cleaned carefully with a toothbrush, but don’t prod too far in or you may perferate the membrane rendering it u/s.
Greg
Re: Whirpool ADP 4501/5 4 flashes.
Hi Greg, yeah it looks like the mesh thingy, it’s black in colour right? Do I remove it or clean it in situ?
Chris..Re: Whirpool ADP 4501/5 4 flashes.
I usually manage to clean them in situ effzedarr, as greg suggests with a toothbrush or similar. I then follow that up by pouring some near-boiling water from a kettle in, enough to cover it, then with a long piece of silicon tube suck and blow the water through the mesh.
Just make sure the hose is quite long, or don’t suck too hard 😯
- You must be logged in to reply to this topic.