SERVIS 1500 RPM Fasilogic M3025W – skipping rinse/spin cycle

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › SERVIS 1500 RPM Fasilogic M3025W – skipping rinse/spin cycle

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 3, 2007 at 9:24 am #24729
    deanfergi
    Participant

    Can anyone advise? SN: 20030404195-0010077177-11 01
    Tumble dryer just been faulty too (power switch replaced and ok now)
    These came as a package – coincidence they both fail at the same time almost?!… 😥

    February 3, 2007 at 9:28 am #203099
    deanfergi
    Participant

    Re: SERVIS 1500 RPM Fasilogic M3025W – skipping spin cycle

    deanfergi wrote:Can anyone advise? SN: 20030404195-0010077177-11 01
    Tumble dryer just been faulty too (power switch replaced and ok now)
    These came as a package – coincidence they both fail at the same time almost?!… 😥

    JUST SPIN CYCLE ACTUALLY…Has leaked at the bottom/filter recently. Limescale stopping spin or anything like that maybe?

    February 3, 2007 at 10:42 am #203100
    deanfergi
    Participant

    Re: SERVIS 1500 RPM Fasilogic M3025W – skipping rinse/spin c

    Filter may have been loose though so problem is just skipping spin cycle on programme…

    February 3, 2007 at 2:54 pm #203101
    Washman
    Participant

    Re: SERVIS 1500 RPM Fasilogic M3025W – skipping rinse/spin c

    Hi

    Is machine emptying out the water or stopping with water in it.

    MIke

    February 4, 2007 at 8:50 am #203102
    deanfergi
    Participant

    Re: SERVIS 1500 RPM Easilogic M3025W – will not spin

    It stops in the wash cycle, for example, with the water in but refusing to spin (it can physically rotate, whether easily ie. not struggling I can’t tell) then the Start light goes out. Selecting Empty and Spin will pump out the water but won’t / can’t spin…Tried to use OUST in case of limescale but couldn’t complete the 60 degree wash for it obviously…

    Thanks

    February 4, 2007 at 9:34 am #203103
    Washman
    Participant

    Re: SERVIS 1500 RPM Fasilogic M3025W – skipping rinse/spin c

    Hi

    When you say it stops in wash cycle and refuses to spin do you mean that the motor will not turn the drum at wash speed. If so it could be motor brushes or a control module at fault. Time for an engineer to look at machine.


    Mike

    February 4, 2007 at 4:19 pm #203104
    deanfergi
    Participant

    Re: SERVIS 1500 RPM Fasilogic M3025W – skipping rinse/spin c

    The drum can rotate during the initial part of the wash program but the rinse and spin (I’m presuming it doesn’t rinse as it needs the spin to begin) doesn’t happen, nor if the machine is set to empty and spin – it empties but doesn’t spin (sits making a humming noise – motor?) at spin speed, or any speed! as if the next level to go to is missing so to speak) Doesn’t make any noise when failing in wash just turns off as if hasn’t the ability to spin so stops…

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.