Diplomat APM 8512/01 not working

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Diplomat APM 8512/01 not working

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 6, 2007 at 1:20 pm #24813
    pudtk
    Participant

    I have an APM 8512/01 it stopped during a wash cycle(Quickwash) after about 10 minutes, the machine wouldn’t spin and drain the water. After 30 minutes of waiting I was able to open the door and take out the soggy clothes and then drain the machine of the excess water.
    The machine now doesnt work at all, when you choose a programme you hear it click but the machine does not fill up with water now.
    Any advise is much appreciated. thanks

    February 6, 2007 at 3:44 pm #203391
    pudtk
    Participant

    Re: APM 8512/01 not working

    Hi
    All i have is the serial no;-
    Its an APM 8512 Diplomat: serial no:- 200 3281 3806-010103003-01.
    Hope this is helpful
    Pudtk

    February 6, 2007 at 3:53 pm #203392
    gegsy
    Participant

    Re: Diplomat APM 8512/01 not working

    Hi
    For some reason I thought it was a whirlpool 😳
    Have adjusted your title accordingly, hope that ok with you 😀

    Greg

    February 6, 2007 at 3:54 pm #203393
    pudtk
    Participant

    Re: Diplomat APM 8512/01 not working

    Thanks

    February 6, 2007 at 4:52 pm #203394
    Washman
    Participant

    Re: Diplomat APM 8512/01 not working

    Hi

    Its a Servis built machine.

    Mike

    February 6, 2007 at 5:20 pm #203395
    pudtk
    Participant

    Re: Diplomat APM 8512/01 not working

    I getting confused I think it could be a Servis/Hygena/Diplomat they all do APM 8512

    February 6, 2007 at 5:23 pm #203396
    kwatt
    Keymaster

    Re: Diplomat APM 8512/01 not working

    Hi Pud,

    It’s an Antonio Merloni produced machine.

    It sounds like you have either a door lock or module failure, the latter being more likely and also more costly. 😕

    K.

    February 8, 2007 at 6:02 pm #203397
    NWAR
    Moderator

    Re: Diplomat APM 8512/01 not working

    It’s worth noting that the module in this machine isn’t the same as the module in the normal APM8512. There should be a sticker along the front of the machine near the bottom (behind the kickboard) with a list of a few part numbers on it. It’s probably 546021400 (might be listed as 546021401) but worth checking before purchasing should you decide that it requires a new one.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.