Whirlpool W/D AWG349/3. NO LIVE TO DRYER HEATER

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool W/D AWG349/3. NO LIVE TO DRYER HEATER

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 11, 2007 at 12:30 pm #24957
    pmb
    Participant

    Intergratted washer?dryer,
    I got call backs for no heat on drying, But worked ok for me, then on last call it did not get live feed to dryer heater,
    Wire comes from one of the two modules located under door gasket,
    There is no blown tracking,
    I dont wont to be stuck with a module i will never use if its not that
    Anyone had this fault

    February 11, 2007 at 2:21 pm #203963
    Penguin45
    Participant

    Re: Whirlpool W/D AWG349/3. NO LIVE TO DRYER HEATER

    Mail………
    Chris.

    February 20, 2007 at 4:24 pm #203964
    pmb
    Participant

    Re: Whirlpool W/D AWG349/3. NO LIVE TO DRYER HEATER

    Thanks chris
    One of the modules is just for the dryer and has feed to the heater,
    Ordered one and fitted and its still the same fault,
    Replaced the temperature senser with one from a Hotpoint wash heater,
    It works
    QUESTION Can i leave the Hotpoint senser on there or should i order the whirlpool/ smeg one. Are they calibratted in any way ?
    I now have a module which cust me £75 , Will proberbly bin it

    February 20, 2007 at 4:46 pm #203965
    Martin
    Participant

    Re: Whirlpool W/D AWG349/3. NO LIVE TO DRYER HEATER

    pmb wrote:or should i order the whirlpool/ smeg one. Are they calibratted in any way ?

    I guess by “senser” (sic) you mean the NTC Thermistor? In which case a new Thermistor assy is best sought.

    However, I think you will find that the values (whilst not the same) are at least similar, to a degree….. (Ooops, pardon the pun? :))

    Have a read of this thread : –

    http://www.ukwhitegoods.co.uk/modules.p … ic&t=21935

    February 21, 2007 at 9:18 am #203966
    pmb
    Participant

    Re: Whirlpool W/D AWG349/3. NO LIVE TO DRYER HEATER

    At £40 and i will have to wait another week for delivery,
    I might leave the hotpoint one on if it wont do any harm,
    The customer wonts the machine back.
    Thermister I know, IT was just smeg call it a temperature senser but i should know better

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.