Beko WMA 1715S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA 1715S

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 12, 2007 at 7:07 pm #24985
    rocker
    Participant

    Machine not working, pre-wash light is flashing all the time. can anyone tell me possible fault .
    cheers john. 😀

    February 12, 2007 at 7:35 pm #204064
    Penguin45
    Participant

    Re: Beko WMA 1715S

    Every one of these that I’ve seen with prewash flashing has had to have the board replaced.

    Chris.

    February 12, 2007 at 10:48 pm #204065
    Tony_EMW
    Participant

    Re: Beko WMA 1715S

    John send it to us for repair – £34.90+vat
    Tony

    February 12, 2007 at 11:14 pm #204066
    bazza500
    Participant

    Re: Beko WMA 1715S

    I`ve had a few that just need reset,

    try this first before replacing the board

    Turn power button off (not at wall)
    Select 90 degree wash
    Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down – Start light will flash.
    Leave power on.
    Select any Spin position.
    Press Start and Cancel button at same time again for 3 seconds – other buttons may start to flash – if they do, press Start and Cancel button together again for 3 seconds.
    Machine should be re-set ready for use.

    February 13, 2007 at 8:34 am #204067
    rocker
    Participant

    Re: Beko WMA 1715S

    many thanks to all you gents for your help, will try to reset first, if no joy will sent to tony at emw for repair. John

    February 13, 2007 at 1:22 pm #204068
    rocker
    Participant

    Re: Beko WMA 1715S

    well done Bazza- reset, all ok now cheers John.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.