- This topic has 4 replies, 2 voices, and was last updated 19 years, 2 months ago by
.
-
Posts
-
My dishwasher has suddenly stopped working, when swithched on the P0 code appears but I cant change it from P0 to the required programme.
The clock button shows the number 19 when pressed and the eco button doesn’t seem to bring the icon to the display (but does that only work once a programme is selected?)
Anyway I’d be grateful for any info on thsi fault. Theres nothing in the manual that covers this.
Re: Diplomat ADP8234
Two possibilities……
1) The rubber button and lever undeneath are not working properly. Unlikely.
2) Board failure. Quite possible – but you need to get the machine investigated properly – this very often a “cause and effect” problem. The computer board is not cheap, so it would be unfortunate to have a new one fail.Power off, if you choose to do this yourself.
Regards,
Penguin45.Re: Diplomat ADP8234
Thanks for this. Things have moved on a bit. I saw a previous post suggesting that you switch it on and press the programme button twice and then switch it off and on again. At first this appeared to clear the problem and I had the programme button operating again. But when I went to use the dishwasher later I had the 3 wavy lines with an X and the 1/2 symbol displayed.
Any idea what this means?
- You must be logged in to reply to this topic.