ariston a1636

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ariston a1636

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • February 18, 2007 at 6:05 pm #25157
    sandysuds
    Participant

    Hi ,im stuck with a problem on a ariston a1636 when i switch it on and choose a program and then press the start the door lock light flashes constantly, and the rapid light is on, have changed the interlock ,door is locking ok.(this machine has a 3 phase motor)has any one came across anything like this

    February 18, 2007 at 6:33 pm #204747
    admin
    Keymaster

    Which is rapid light ? Delay timer?… from left upper side on second column is the first Led ?
    If “Yes” it’s ( F08 ) 8)

    February 18, 2007 at 7:16 pm #204748
    sandysuds
    Participant

    Re: ariston a1636

    thanks for reply baron, its the rapid wash light thats on bottom of second column

    February 18, 2007 at 9:55 pm #204749
    admin
    Keymaster

    Then is F01: Triac Motor short circuit
    • Check J9 contacts
    • Check the motor terminal block
    • Check Motor Triac ( SCC)
    • Replace Card

    February 18, 2007 at 10:03 pm #204750
    admin
    Keymaster

    But from my experience it was also some dirty on PCB arround those diodes&resistors (which are in line) near relays… you will see small burnt black line between pcb-routes.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.