Zanussi ZI16 Prod. 91451302100

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZI16 Prod. 91451302100

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 19, 2007 at 6:40 pm #25187
    Alanj
    Participant

    Hi Guys,

    went to this W/M today. Fault was program would stop soon after starting and reset back to start of program or go 40 alarm code. This indicates door lock problem or control triac on module for door circuit is faulty.Door interlock works ok, so I assume module fault,but what I hope some of you Zanussi/Electrolux engineers can tell me is, can this fault be thrown up by a faulty heater relay on module as it looks like it has badly burnt contacts.Otherwise the board looks ok.

    Alan

    February 19, 2007 at 10:50 pm #204832
    admin
    Keymaster

    Alan,
    read correctly error (enter in test program) after one of those situations.
    Can be heater relay, heater himself, door lock, cables(wires), connectors… or something inside on PCB (for example one resistor of 470 KOhm)

    February 20, 2007 at 1:46 pm #204833
    Alanj
    Participant

    Re: Zanussi ZI16 Prod. 91451302100

    Thanks for the reply Baron, have sent module off to QER for repair.

    Alan

    February 27, 2007 at 10:57 pm #204834
    Alanj
    Participant

    Re: Zanussi ZI16 Prod. 91451302100

    Hi all,

    just thought I’d let you know traced problem back to a pinhole in pressure hose, which had been rubbed through on module cover.Module itself was ok.

    Alan

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.