TV630

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › TV630

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • February 22, 2007 at 1:31 pm #25281
    nor
    Participant

    I recently fitted a new heater element. I have to run the cycle twice to dry the load ! Help please !!!!

    February 22, 2007 at 2:43 pm #205220
    Martin
    Participant

    Re: TV630

    TV630? Is that a Hoover?

    Why did you replace the heater? Was the old one faulty?

    February 22, 2007 at 3:59 pm #205221
    nor
    Participant

    Re: TV630

    OOPS ! Sorry, yes it is a Hoover TV630. The dryer ran, but no heat at all. My son’s electrician freind tested the heater unit and told me it was faulty. I replaced the unit, and it worked ok. Only to find that after one cycle, the clothes were still damp. I re-ran the same cycle again to find the clothes spot on once complete. Could it be a faulty thermostat ?

    February 22, 2007 at 4:50 pm #205222
    Martin
    Participant

    Re: TV630

    nor wrote:Could it be a faulty thermostat ?

    It’s possible I suppose but unlikely as a new stat comes as part of the heater assembly, unless it got damaged in fitting??

    February 23, 2007 at 12:04 am #205223
    nor
    Participant

    Re: TV630

    According to the “fiche” there is a stat located at the front of the drum ?

    February 23, 2007 at 12:19 am #205224
    Dave_Conway
    Participant

    Re: TV630

    nor wrote:According to the “fiche” there is a stat located at the front of the drum ?

    There is, it’s this one here:

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=297

    Dave 🙂

    February 23, 2007 at 8:52 am #205225
    nor
    Participant

    Re: TV630

    Thanks Dave. If the stat was faulty it would be relaying false information ? Shall I order a new one ? Cheers

    February 23, 2007 at 9:42 am #205226
    Dave_Conway
    Participant

    Re: TV630

    nor wrote:If the stat was faulty it would be relaying false information ?

    If it is faulty then yes.

    nor wrote:Shall I order a new one ?

    That’s your call 😉

    Dave.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.