teka dw6 59 fl, beeping twice and not running cycle

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › teka dw6 59 fl, beeping twice and not running cycle

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • February 25, 2007 at 12:11 pm #25359
    anzagi
    Participant

    hi, I have the above dishwasher and when I select a program and shut the door it just beeps twice, then If left as it is a short while later it beeps again. When I open the door the E and the glass icon are flashing…. any thoughts? have tried switching it off at the mains to reset but no joy, any help would be great!

    February 25, 2007 at 12:28 pm #205553
    Penguin45
    Participant

    Re: teka dw6 59 fl, beeping twice and not running cycle

    These are the first two lamps? If so you have the much loved “Haier-in-a-skirt” Chinese dishwasher. The fault is no fill detected in the time allowed. If you are lucky, the water may be turned off or the fill hose may be kinked or trapped. If you are unlucky, the inlet valve may have failed or the computer board packed in. Always worth checking whether or not the tray under the machine is full of water…….

    Power off before sticking fingers inside, please.

    Regards,
    Penguin45.

    February 25, 2007 at 12:33 pm #205554
    anzagi
    Participant

    Re: teka dw6 59 fl, beeping twice and not running cycle

    Thanks for the reply, its the 2nd and 3rd lamp, the first one is the rinse option I think. When I open the dishwasher the tray inside at the bottom (with the filter plugged into it) is full of water….could that be blocked? so I just need to remove the filter and then poke around with fingers to find something perhaps?

    thanks again

    February 25, 2007 at 2:05 pm #205555
    Penguin45
    Participant

    Re: teka dw6 59 fl, beeping twice and not running cycle

    Hmm – not a code I recognise, I’m afraid. Apply some logic here. If you can reset the programme, the first thing that should happen when restarted is drain, so the water in the tub should go. If it doesn’t, you may have a blockage.

    I was suggesting that you might check the tray right at the bottom of the machine. These machines are notorious leakers.

    Penguin45.

    February 25, 2007 at 2:46 pm #205556
    anzagi
    Participant

    Re: teka dw6 59 fl, beeping twice and not running cycle

    I’m going to investigate now……

    February 25, 2007 at 3:10 pm #205557
    anzagi
    Participant

    Re: teka dw6 59 fl, beeping twice and not running cycle

    ok i took apart the bottom, removed the filter etc… emptied the excess water out with a cup, had a feel around for any blockage and nothing…..put it back together and it does just the same! does anybody know where I can get an instruction manual for it?

    February 26, 2007 at 8:12 pm #205558
    anzagi
    Participant

    Re: teka dw6 59 fl, beeping twice and not running cycle

    any more ideas…..? do these machines have a reset button anywhere?

    February 26, 2007 at 9:01 pm #205559
    Penguin45
    Participant

    Re: teka dw6 59 fl, beeping twice and not running cycle

    Did you check the tray under the machine?

    Penguin45.

    February 26, 2007 at 9:35 pm #205560
    anzagi
    Participant

    Re: teka dw6 59 fl, beeping twice and not running cycle

    not actually sure how to get into that, at my parent in laws you see so kind of guessing a bit…. Ive removed the bottom of the cupboard as its built in, but cannot see where I would access a bottom tray

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.