- This topic has 2 replies, 2 voices, and was last updated 19 years, 1 month ago by
.
-
Posts
-
My wife put the dishwasher on last week and after about 4 hours the progamme knob had not moved. I am assuming the motor on the timer has given up. It has power getting to it and all the drive gears appear to be intact. I have removed it from the back of the timer and when it powers up it does not rotate just oscilates back and fourth.
Guess it needs new timer unit. Is £30 from espares a good price?Re: Beko 3731F timer not going round
Have you tried the programme on a rinse cycle? timers do go faulty but there is quite a few other faults that will give you the same fault.
Kirk
Re: Beko 3731F timer not going round
Hi Kirk
Thanks for reply.
Seems to move but is erratic and quite noisy(not sure if it was always that noisy).
I suppose another fault can cause timer not to rotate if a something hasnt completed its operation. ie water not reached correct temp.
Think I need to start from the beginning.
Mark
- You must be logged in to reply to this topic.