Dyson DC07

Home › Forums › Public Support Forums › Help And Support › Vacuum Cleaner Help Forum › Dyson DC07

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 28, 2007 at 5:07 pm #25461
    LizzieM
    Participant

    My DC07 is not sucking correctly. It sucks brilliantly through the hose but is very poot through the base. I have looked at the small hose linkng the base to the junction for the main hose and cannot see any holes. Is there anything else could be causing the problem? It has recen;t had the motor and the clutch replaced.

    Thanks,

    Lizzie

    February 28, 2007 at 6:31 pm #205953
    SWERV
    Participant

    Re: Dyson DC07

    First port of call is to establish if the brush roller is rotating? if it is, check for any blockages that may be apparent and ensure that the filter is clean.If that doesn’t cure the problem, you may need to replace the cyclone top.
    Hope that helps.
    Merv

    March 2, 2007 at 5:19 pm #205954
    LizzieM
    Participant

    Re: Dyson DC07

    Thanks very much! Of course I missed the obvious – the brush is not turning so I have returned it to where it was repaired where he admitted all he had done was turn it on and make sure it was going. Thanks – it’s back in their hands now.

    Lizzie

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.