Belling Cooker 626

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Belling Cooker 626

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 1, 2007 at 1:08 pm #25478
    rocker
    Participant

    There are two 1.2 kw hob elements that work, but am unable to ajust heat, I am sure the energy regulators are faulty, but because the elements have limiters fitted, ( I have little knowledgen of these) can these also cause the same fault.
    Cheers John

    March 6, 2007 at 11:49 pm #206003
    Dave_Conway
    Participant

    Re: Belling Cooker 626

    rocker wrote:can these also cause the same fault.

    Nope, replace the simmerstats, common fault on these 😉

    Dave.

    March 7, 2007 at 9:42 am #206004
    rocker
    Participant

    Re: Belling Cooker 626

    Dave, does this mean complete element !!!or cant I buy simmer stats.
    Cheers John.

    March 7, 2007 at 2:05 pm #206005
    Dave_Conway
    Participant

    Re: Belling Cooker 626

    If the limiter has failed it’s a complete hotplate required yes 🙁

    Dave.

    March 7, 2007 at 2:25 pm #206006
    electrofix
    Moderator

    Re: Belling Cooker 626

    if the elements are glowing red no matter where you put the knob then the simmerstat is faulty

    the simmerstat is behind the knob i am sure dave can come up with a part number if you want two

    Dave (electrofix)

    March 7, 2007 at 4:33 pm #206007
    rocker
    Participant

    Re: Belling Cooker 626

    Many thanks for your help, to both Daves. Cheers John

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.