WF440 Hotpoint

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › WF440 Hotpoint

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 2, 2007 at 8:15 pm #25524
    geoffmackay
    Participant

    Rebuilt drum assy using new drum back. Re assembled machine and went to test it. Door locks, then machine ramps up 3 times and stops. Chechecked all connections inc motot harness. Any ideas?

    Geoff

    March 4, 2007 at 11:30 am #206246
    DAZ123
    Participant

    Re: WF440 Hotpoint

    Sounds like the board may not be getting a signal back from the motor tacho, is there any leds flashing?

    March 4, 2007 at 1:48 pm #206247
    geoffmackay
    Participant

    Re: WF440 Hotpoint

    No nothing flashing. Going to have a look at the motor / module.

    March 4, 2007 at 5:55 pm #206248
    admin
    Keymaster

    Re: WF440 Hotpoint

    geoffmackay wrote: Re assembled machine and went to test it. Door locks, then machine ramps up 3 times and stops.

    Do you mean test program? 😉
    First thoughs are pump, heater and motor wires.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.