- This topic has 4 replies, 4 voices, and was last updated 19 years, 1 month ago by
.
-
Posts
-
Went to Bosch WFD2073/08 washer with a creeking/cracking noise when agitating & spinning checked over but could not see anything obvious suspension seems ok, If you hold the cabinet and attemp to twist or move it thats when the noise happens, could this be a cracked weld on chassis it all looks ok.
Any one else come across thisI be glad when this week is over, the S**t jobs Ive had lately.
Steven
Re: Bosch W/m WFD2073 creeking
Had this problem on a Bosch a couple of weeks back, it turned out that when it was installed the supplier adjusted the feet but did not tighten up the locking nuts. Have a look at these 😉
Re: Bosch W/m WFD2073 creeking
All feet wound up tight, on a good concrete garage floor. Been in same position for a while.
Removed plastic trim and screws checked all seem tight.strange one!!
Re: Bosch W/m WFD2073 creeking
Steven wrote: creeking/cracking noise when agitating & spinning checked over but could not see anything obvious suspension seems ok, If you hold the cabinet and attemp to twist or move it thats when the noise happens, could this be a cracked weld on chassis it all looks ok.
Do you mean sounds like metal crack?
Verify shock absorber support at floor panel for cracked weld or even their connections (take it in your hand and try to twist or move). Screws from shock absorber try to tight them more.
- You must be logged in to reply to this topic.