Diplomat (854500215820) dishwasher.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Diplomat (854500215820) dishwasher.

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • March 4, 2007 at 10:35 pm #25567
    aqualectric
    Participant

    Diplomat (854500215820 Whirlpool) integrated dishwasher.
    F7 fault on the delay timer display. Machine stops. (works perfectly when I’m there 😈 )
    The known fault codes say ‘valve or inlet problems’. The valve is OK and the water supply is good; no water in the drip tray. Drains quickly and the wash motor is running perfectly. Heats OK. I’ve even swapped the PCB with a known working s/hand one. 😈
    Now, before I try my 2lb lump hammer on it, any ideas?

    Thanks,

    Steve.

    March 5, 2007 at 12:21 am #206418
    Penguin45
    Participant

    Re: Diplomat (854500215820) dishwasher.

    Flow meter failure. Removing l/h panel, giving the contacts a clean and a squeeze will often cure it.

    Chris.

    March 6, 2007 at 12:49 am #206419
    aqualectric
    Participant

    Re: Diplomat (854500215820) dishwasher.

    Is that on the side of the airbox at the bottom? 😕 If so, what ‘flow’ can it check?

    Steve.

    March 6, 2007 at 12:52 am #206420
    Penguin45
    Participant

    Re: Diplomat (854500215820) dishwasher.

    It’s a whirly thing on the fill matrix on the left hand side. The pulses generated help tell the computer how much water is in the machine. They suffer from oxidisation on the little PCB and edge connector – a good clean usually sorts it.

    Chris.

    March 6, 2007 at 1:03 am #206421
    aqualectric
    Participant

    Re: Diplomat (854500215820) dishwasher.

    Thanks Chris!!! 😀
    This bloody machine has given me hassle on and off all last week. It’s in the workshop now so I’ll either fix it or BEAT IT TO A PULP WITH A LUMP HAMMER!!!!!!!! :angry4:
    Oh. I love my job!!! :bang:

    Steve.

    March 6, 2007 at 1:15 am #206422
    Penguin45
    Participant

    Re: Diplomat (854500215820) dishwasher.

    ‘Ere – you know what youy said here:
    http://www.ukwhitegoods.co.uk/modules.p … ic&t=22643

    Same thing really! Go on, you can do it. 😀

    Chris.

    March 7, 2007 at 1:03 am #206423
    aqualectric
    Participant

    Re: Diplomat (854500215820) dishwasher.

    Didn’t work, I’m afraid – do these flow meters fail? Are they available separately? Machine started perfectly and ran for 40 mins then ‘beep beep’ F7!!! I’ve just binned one of these ADP8332’s early last week – only scrapped as the outlet hose from the wash pump was holed and the customer wouldn’t pay for a motor. Everything else was known working!!! 😈
    Ain’t it always the way…….. :rolls:
    Any other ideas as I’m starting to hyperventilate!!!!!

    Steve.

    March 7, 2007 at 1:12 am #206424
    gegsy
    Participant

    Re: Diplomat (854500215820) dishwasher.

    aqualectric wrote:Are they available separately?

    Unfortunately no 😥 They come complete with the water matrix p/no 481241868147, around the £50 mark.

    Greg

    March 7, 2007 at 1:20 am #206425
    aqualectric
    Participant

    Re: Diplomat (854500215820) dishwasher.

    Thanks, Greg!!
    The lump hammer it is , then!!!! :rotfl:
    Presenting the World’s First Triangular Dishwasher!!

    Steve.

    March 7, 2007 at 1:23 am #206426
    gegsy
    Participant

    Re: Diplomat (854500215820) dishwasher.

    Steve, I reckon some of the guys will be sending their Haier shit to you then, could be quite lucrative 😆

    Greg

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.