Hotpoint BF12

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint BF12

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 5, 2007 at 5:25 pm #25591
    TOWAN
    Participant

    Have been to look at this d/w and found that when you switch off on the main on-off switch the light stayes on and machine carries on working.
    If you do this whilst filling the wash pump stays on but the valve shuts off.
    Cust complaining of it sticking on rinse.
    Was late in day so am going back later in week
    Any one come across this fault or have any ideas?
    Thanks
    Dan

    March 5, 2007 at 11:08 pm #206534
    iadom
    Moderator

    Re: Hotpoint BF12

    Not come across anything like that, only had to change the awful door spring mechanism on a couple. I could be wrong but I think it is a Smeg.

    Jim.

    March 6, 2007 at 8:18 am #206535
    eastlmark
    Moderator

    Re: Hotpoint BF12

    long shot but check for a earthed heater or stuck pressure switch contacts. Its a Fagor by the way.

    March 6, 2007 at 10:04 am #206536
    iadom
    Moderator

    Re: Hotpoint BF12

    Thanks Mark, I do remember now, DC told me that a while back when I first ordered the metal strips for the door springs, memory not what it was. 😥

    Jim.

    March 6, 2007 at 10:26 am #206537
    TOWAN
    Participant

    Re: Hotpoint BF12

    is a fagor,
    remember them from my Baumatic days!!
    thanks for help, will be going back tomorrow.
    Dan

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.