Zanussi E60 Fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi E60 Fault

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 6, 2007 at 6:15 pm #25625
    mjhservices
    Participant

    Zanussi ZWF1640W.
    Turn the dial on and E60 is displayed. It does not do anything else. No fill, pump etc or any noise just shows E60 as soon as the dial is turned to anything.
    Can you help?
    Mark

    March 6, 2007 at 7:13 pm #206775
    pmb
    Participant

    Re: Zanussi E60 Fault

    Hi i think e60 means the modules aren’t comunicating which is normally the wiring connector that runs between them needs to be taken off and the plugs squeezed together so they make a better connection. With these machines i normally check the valves, heater, brushs quickly just in case

    March 6, 2007 at 7:27 pm #206776
    helo_75
    Participant

    Re: Zanussi E60 Fault

    thought that was e90?

    e60 is insfficient heating during wash

    check the wash heater/thermistor

    hope this helps

    March 6, 2007 at 8:15 pm #206777
    admin
    Keymaster

    Re: Zanussi E60 Fault

    For accurate read error inside service regime.(can be underheating also overheating error) 😯
    If has heater on jet system (between recirculation & evacuating pumps) clean heater tube. 😕

    Baron 8)

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.