Whirlpool AWG320

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool AWG320

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 6, 2007 at 8:41 pm #25633
    Fairdeal
    Participant

    Hi Guys,

    Customer phoned up to say that the machine has intermitent fault,the mcahine starts taking water in and it starts draining at the same time.The waste pipe is at correct height.It goes on and on until you turn it off.

    It is 9 years old washer dryer with the chunkey timer at the front.

    Is it better to take to take a pressure switch if there is no partial blockage

    Regards

    March 6, 2007 at 8:46 pm #206801
    Penguin45
    Participant

    Re: Whirlpool AWG320

    Merloni washer dryer – flood protection level jammed on at p/sw or dodgy timer.

    Chris.

    March 6, 2007 at 8:47 pm #206802
    bobokines
    Participant

    Re: Whirlpool AWG320

    First thing to do is to meggar the machine. Bet you have either a trapped wire or an earthy heater…

    Bob

    March 6, 2007 at 8:54 pm #206803
    bobokines
    Participant

    Re: Whirlpool AWG320

    :waving:

    Hi Chris

    March 6, 2007 at 9:02 pm #206804
    Penguin45
    Participant

    Re: Whirlpool AWG320

    :waving:
    Evening, Bob.

    March 7, 2007 at 6:48 pm #206805
    lokring
    Participant

    Re: Whirlpool AWG320

    short circuit coil on fill valve it took me a while to find this one. you remember the bad ones……

    March 7, 2007 at 9:07 pm #206806
    bobokines
    Participant

    Re: Whirlpool AWG320

    I don’t remember ever having a short circuit coil on a fill vave.

    Something new evert day.

    Bob

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.