Haier Dishwasher

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Haier Dishwasher

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • March 10, 2007 at 11:45 am #25730
    jellyhammer29
    Participant

    I have a Haier Dishwasher that will not empty. It is a Haier WQP4-2000N/S. I have a feeling the impeller is stuck or has become dislodged, the machine makes a hum when trying to empty indicating the motor is trying to work but nothing happens, can anyone advise?

    March 10, 2007 at 2:06 pm #207363
    gegsy
    Participant

    Re: Haier Dishwasher

    Hi
    Yes it sounds jammed or faulty. You will have to remove pump and look for debris.

    Power off before attempting :plug:

    Greg

    March 10, 2007 at 2:07 pm #207364
    kwatt
    Keymaster

    Re: Haier Dishwasher

    Fair warning Jelly, these machines are an absolute pig to work on. 😉

    If you do a search for Haier or Midea on the forum you’ll get a sense of what we think.

    K.

    March 10, 2007 at 5:22 pm #207365
    iadom
    Moderator

    Re: Haier Dishwasher

    Go on then, I will move it to the correct forum, :rolls: 😀

    Jim.

    March 10, 2007 at 5:25 pm #207366
    gegsy
    Participant

    Re: Haier Dishwasher

    What forum would that be Jimbo 😀
    We havent got a Shit Appliance Forum 😆
    Greg

    March 10, 2007 at 7:14 pm #207367
    Penguin45
    Participant

    Re: Haier Dishwasher

    Now, now – we are supposed help the OP solve his problem……

    Chris.

    March 10, 2007 at 8:35 pm #207368
    gegsy
    Participant

    Re: Haier Dishwasher

    ok all yours 😈

    March 11, 2007 at 1:32 pm #207369
    jellyhammer29
    Participant

    Re: Haier Dishwasher

    Cheers guys, will take take it to bits today. Will (definitely) use this site if i have any more Q’s.

    March 11, 2007 at 6:16 pm #207370
    jellyhammer29
    Participant

    Re: Haier Dishwasher

    Cheers to all who gave advice. Spent 5 hours buggering about with it but the impeller’s magnetic core had tons of grease round it preventing it from turning. had a bit of a leak first time round but working perfectly now. Thanks again Jellyhammer

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.