Whirlpool ADG 934

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Whirlpool ADG 934

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • March 10, 2007 at 8:38 pm #25746
    samwire
    Participant

    ok…when i select the desired programme, the start light blinks repeatedly,i hold in the start button to try and override it, the machine kicks in for about 20 seconds, then dies still with the start button blinking…any help as to why this happens would be greatly appreciated…thanks..

    March 10, 2007 at 11:55 pm #207413
    clivejameson
    Participant

    Re: Whirlpool ADG 934

    The blinking will have a pattern to it which indicates a fault code. Count the flashes, it will then pause, then repeat the flashes….
    Let us know the number of flashes and we can point you in the right direction 😉

    March 11, 2007 at 8:58 am #207414
    samwire
    Participant

    Re: Whirlpool ADG 934

    hi thanks for that, unfortunately the damn thing flashes repeatedly, no pauses at all….

    March 11, 2007 at 11:02 am #207415
    DentedPorsche
    Participant

    Re: Whirlpool ADG 934

    Constant flashing would indicate a problem with the NTC. You’ll find the part in the Shop@ link.

    DP

    March 11, 2007 at 11:11 am #207416
    samwire
    Participant

    Re: Whirlpool ADG 934

    pardon my stupidness, but whats an ntc?

    March 11, 2007 at 11:32 am #207417
    gegsy
    Participant

    Re: Whirlpool ADG 934

    Hi
    Basically its a sensor.

    Greg

    March 11, 2007 at 12:05 pm #207418
    samwire
    Participant

    Re: Whirlpool ADG 934

    ahh right then…i’ve had a look on the shop@ link and i’m kinda lost…what category does an NTC come under, thermostat?also the appliance is integrated does this make it more difficult to change? sorry to be a pain…

    March 11, 2007 at 12:46 pm #207419
    Penguin45
    Participant

    Re: Whirlpool ADG 934

    http://www.ukwhitegoods.co.uk/modules.p … cts_id=476

    Is what you want. Piccie appears to have crashed. It’s the “prong” sticking up through the floor of the sump.

    Penguin45.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.