Creda Condenser Tumble Dryer TCR2: No Heat

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Creda Condenser Tumble Dryer TCR2: No Heat

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 18, 2007 at 8:48 pm #25936
    percnica
    Participant

    I have aquired a TCR2 Condenser Dryer. It runs but does not get hot. Any advise as to what could be the cause?
    Suspect Dryer Element but would like advise before embarking down this route as to what else coulde be the cause.
    Have cleean all the Condenser Fins etc

    Thanks Nick

    March 18, 2007 at 9:45 pm #208177
    helo_75
    Participant

    Re: Creda Condenser Tumble Dryer TCR2: No Heat

    nah, its normally the two thermostats located over the heater thats the problem

    im not sure if the tcr2 is the later model.. is the water tray at the top or botom?

    March 21, 2007 at 9:23 pm #208178
    percnica
    Participant

    Re: Creda Condenser Tumble Dryer TCR2: No Heat

    Thanks the Thermostate has a trip which you can rerset with a small needle worked fine

    March 22, 2007 at 1:00 am #208179
    Penguin45
    Participant

    Re: Creda Condenser Tumble Dryer TCR2: No Heat

    Worked out why it went? They are supposed to be single use only, after all.

    Regards,
    Penguin45.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.