dryer ctd40

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › dryer ctd40

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • March 19, 2007 at 9:37 am #25946
    dopper
    Participant

    hp dryer ctd40 not working as empty water light on checked float switch looks ok what else causes this water light to stay on? paul

    March 19, 2007 at 11:44 am #208200
    iadom
    Moderator

    Re: dryer ctd40

    The search facility is the best place to start, I entered ‘Hotpoint AND Dryer’ and found this. http://tinyurl.com/yrux2s for starters.

    Jim.

    March 19, 2007 at 3:58 pm #208201
    dopper
    Participant

    Re: dryer ctd40

    this ones total dead apart from empty water light , float swicth tests ok, this one has a pcb module inside cabnet, looks like its that, maybe not worth repair

    March 19, 2007 at 5:06 pm #208202
    iadom
    Moderator

    Re: dryer ctd40

    Could possibly sort a wiring diagram for you but it does sound a bit costly, Power module( excluding eeprom) almost £70 + vat, facia PCB around £55 + vat. 😥

    Jim.

    March 23, 2007 at 8:38 pm #208203
    hotpnt
    Participant

    Re: dryer ctd40

    hi, you may well have sorted this one by now, but just one point, on some of these the module puts the light on whenever the door is open as a reminder to empty the tank, so if the door lock is duff it will keep the light on and also make the whole machine ‘dead’. cause if it was really thinking the bottle was full it would still start up & run, just with no heat

    March 23, 2007 at 11:07 pm #208204
    iadom
    Moderator

    Re: dryer ctd40

    Thanks for that, a very useful reminder, thinking about it the empty water light is often ‘on’ on lots of machines before you switch on. Is this the same on the machines with the bog standard door lock or just the later ones with a door interlock?

    Jim.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.