Smeg WDI 12C

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Smeg WDI 12C

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • March 19, 2007 at 9:37 pm #25973
    ChrisR
    Participant

    Hi guys.

    The above machine flashes stop and although the door is closed,the machine thinks its open.
    Have fitted another door lock to test and it makes no differrence.

    I suspect the fault may be in the programmer……….can anybody help?.

    Thanks.

    Chris.

    March 19, 2007 at 10:46 pm #208306
    roly16
    Participant

    Re: Smeg WDI 12C

    I had this on a WI12 washing machine recently; don’t know if it’s the same door interlock. I took the lock off, operated it by hand and the machine worked. I put it back and it still worked, so I never found out what was wrong. I’m expecting a call back but it hasn’t come yet!

    March 20, 2007 at 12:13 am #208307
    Penguin45
    Participant

    Re: Smeg WDI 12C

    There was a problem with the lock which was solved by opening the screw holes to the right, allowing the lock to sit over to the left slightly. Apparently new locks are now adjusted…..

    Chris.

    March 20, 2007 at 7:35 am #208308
    roly16
    Participant

    Re: Smeg WDI 12C

    Penguin45 wrote:There was a problem with the lock which was solved by opening the screw holes to the right, allowing the lock to sit over to the left slightly. Apparently new locks are now adjusted…..

    Chris.

    If you file the holes out in the lock won’t there be a problem with the screws not tightening up or the lock just finding its own seating in the aperture which may not be correct?

    Geoff

    March 20, 2007 at 9:25 am #208309
    Penguin45
    Participant

    Re: Smeg WDI 12C

    ‘Swot it said in the tech bulletin………

    Chris.

    March 20, 2007 at 9:44 am #208310
    roly16
    Participant

    Re: Smeg WDI 12C

    Penguin45 wrote:‘Swot it said in the tech bulletin………

    Chris.

    Hhhmm

    March 20, 2007 at 6:45 pm #208311
    ChrisR
    Participant

    Re: Smeg WDI 12C

    But even with a new lock it did`nt work.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.