Zanussi IZ161 ” err ” error code.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi IZ161 ” err ” error code.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 23, 2007 at 9:24 am #26083
    SteveATY
    Participant

    Any ideas would be good.

    Been out to see machine. Customer reports that machine starts and runs cycle okay until about 30 odd mins left before countdown timer starts changing in an adnormal manner (drifts down to 26 / 27 mins then back up to 32 mins). After a small period of time the machine halts with and ‘err’ code in the display.
    I’ve check all functions and they all see to work (fill / motor drive / heater / re-circ pump / outlet pump / spin etc).

    I’m thinking that it could be a control module??

    Many thanks,
    Steve.

    March 23, 2007 at 9:32 am #208708
    mbdas
    Participant

    Re: Zanussi IZ161 ” err ” error code.

    HI 🙂
    have you checked the last alarm code if so what is it ❓

    Mark

    March 23, 2007 at 10:13 am #208709
    Alanj
    Participant

    Re: Zanussi IZ161 ” err ” error code.

    You have mail Steve. 8)

    Alan

    March 23, 2007 at 11:38 am #208710
    SteveATY
    Participant

    Re: Zanussi IZ161 ” err ” error code.

    mbdas wrote:HI 🙂
    have you checked the last alarm code if so what is it ❓

    Mark

    How is that done?

    Steve.

    March 23, 2007 at 11:49 am #208711
    Martin
    Participant

    Re: Zanussi IZ161 ” err ” error code.

    SteveATY wrote:How is that done?

    The answer is probably included in Alanj’s email? 😉

    But you can get the idea by reading Dave Conway’s post in the Known Error Codes thread under Zanussi?…….

    http://www.ukwhitegoods.co.uk/modules.p … c&start=45

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.