Whirpool AWG349/3 wont start

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirpool AWG349/3 wont start

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 23, 2007 at 9:58 am #26084
    bassman
    Participant

    Can anyone help with this one I called yesterday the machine switches on the door lock operates I have checked the interlock there is power in and out of the doorswitch when it locks but the machine does nothing i looked at the PCB no obvious blown tracks any suggestions ? Thanks Bassman

    March 23, 2007 at 10:01 am #208712
    Alanj
    Participant

    Re: Whirpool AWG349/3 wont start

    Bassman

    check pump and wiring to pump, also motor brushes/wiring as no motor no fill.

    Alan

    March 23, 2007 at 10:11 am #208713
    admin
    Keymaster

    Re: Whirpool AWG349/3 wont start

    All those you should measure at PCB connectors in order to check in one shut wires also (at each check you can twist&move wires near bounded point to drum). 😉

    8)

    March 23, 2007 at 10:49 am #208714
    bassman
    Participant

    Re: Whirpool AWG349/3 wont start

    Thanks guys I forgot to mention I had checked pump But I did not check at PCB connectors or the motor.
    Thanks again BassmAN

    March 23, 2007 at 2:09 pm #208715
    DentedPorsche
    Participant

    Re: Whirpool AWG349/3 wont start

    Check the carbons in the motor. Should rotate the motor as one of the first checks when it’s switched on with door closed.

    Brian

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.