servis d/w m4605s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › servis d/w m4605s

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • March 23, 2007 at 5:08 pm #26095
    AASWALES
    Participant

    this machine is going through progs ok but with no heat tested heater thermister and thermostat with reset button all ok any ideas please
    cheers alan

    March 23, 2007 at 6:05 pm #208764
    robbra
    Participant

    Re: servis d/w m4605s

    Pcb/programmer is the main culprit on these but dead y to change. Not sure if EMW can repair them.
    Rob
    720414300 up to 4/5/05
    720463500 thereafter
    check date from serial no.

    March 25, 2007 at 9:32 am #208765
    AASWALES
    Participant

    Re: servis d/w m4605s

    ok cheers rob ill find out about emw
    cheers alan

    March 25, 2007 at 6:54 pm #208766
    timdowning
    Participant

    Re: servis d/w m4605s

    Did you insulation test the heater or just ring it out?

    Low insulation on heater does cause a no heat on this model!!!!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.