Zanussi ZHQ757 built in oven problem

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Zanussi ZHQ757 built in oven problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 1, 2007 at 3:38 pm #26297
    jonz
    Participant

    I have just replaced the heater element in the bottom oven of my Zanussi ZHQ575 oven, everything works fine. But in taking off the side cover to the oven because the door hinge came apart while doing the repair. I pulled off brown 240V wire and the tag the wire was connected to. The best description for this part is it has 4 tags ( one now missing) of which three are used. The part is in cased in a black epoxy resin and looks like it has become brittle over time
    The oven appears to work fine
    I have put insulation tape around the loose wire until I can find out what part I need
    Does anyone know what the part is ?
    I work away during the week so I may not reply straight away

    Thanks
    Jon

    April 1, 2007 at 4:38 pm #209582
    helo_75
    Participant

    Re: Zanussi ZHQ757 built in oven problem

    have you tried the grill since the wire broke off?

    April 1, 2007 at 9:16 pm #209583
    jonz
    Participant

    Re: Zanussi ZHQ757 built in oven problem

    I have checked that both grills work in top and bottom oven and all three fans operate. I have used the oven and it was normal.
    I suspect that the device may be either a bridge rectifier to convert AC to DC voltage or a suppression filter when the fans operate.??

    Thanks for the response
    Jon

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.