bosh wfo2865uk/01 time display jumping to end

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › bosh wfo2865uk/01 time display jumping to end

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 3, 2007 at 6:47 pm #26368
    gramp
    Participant

    changed carbons as they were worn right down .when spin is selected 11min comes up on display then press start drum turns and pump goes then when time reaches 8mins it jumps down to 1min does nothing unlocks door and goes to zero.
    if rinse is selected it works ok down to 15mins then jumpsto spin 11min thendoes same as above any ideas ??

    April 3, 2007 at 7:06 pm #209855
    gramp
    Participant

    Re: bosh wfo2865 time display jumping to end

    enr wfo2865uk/01
    fd8311
    601386

    sorry had entered a zero instead of the letter o

    April 3, 2007 at 7:15 pm #209856
    gegsy
    Participant

    Re: bosh wfo2865 time display jumping to end

    Hi
    Was this apparent before the brushes were changed or only now.
    It sounds anyway like a low water pressure problem or its not sensing a correct load of washing.

    Greg

    April 3, 2007 at 10:08 pm #209857
    gramp
    Participant

    Re: bosh wfo2865uk/01 time display jumping to end

    was working fine then didn`t empty .drained then then found some items in pump.put back on to spin 11mins counted down to 8mins then jumped to 1min .then changed brushes.
    when i tried on rinse filled to right level

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.