Whirlpool ADG7550 11 flashes?

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Whirlpool ADG7550 11 flashes?

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 5, 2007 at 7:46 am #26388
    Simon46
    Participant

    Is this the diverter valve faulty? How much and partnumber if so?

    Regards
    Simon

    April 5, 2007 at 7:58 am #209936
    RickT
    Participant

    Re: Whirlpool ADG7550 11 flashes?

    Hi Simon, 11 flashes points to optical water sensor in sump, although I,ve come across this where machine had leaked into base on to wash pump terminals and blown the pcb. Worth checking this for any blown tracks. Hope this helps
    Rick

    April 5, 2007 at 8:02 am #209937
    Simon46
    Participant

    Re: Whirlpool ADG7550 11 flashes?

    Thanks Rick. will clean owi and see

    S.

    April 7, 2007 at 9:02 am #209938
    Simon46
    Participant

    Re: Whirlpool ADG7550 11 flashes?

    Not OWI. Started dishwasher water running out of base 😯 . Opened underneath to find drain pump lying in base next to piece of glass, one vane of plaset pump impellor snapped. All fixings on bayonet pump ripped off. Asked the lady if someone has looked at it before me she replied oh a bloke a few months ago said new pump required. Quoted £200 😯 . all for a piece of glass.

    PS dont try and hold the pump on to test if the dishwasher still works. You aint strong enough whilst its draining 🙂

    regards
    S.

    April 7, 2007 at 2:43 pm #209939
    robwash
    Participant

    Re: Whirlpool ADG7550 11 flashes?

    F11 means you have to change the W.I. switch in sump. normally if glass was in the pump it would flash F4 for not draining. also has the the tube for top spray arm come out as it could be over foaming

    April 7, 2007 at 4:55 pm #209940
    Simon46
    Participant

    Re: Whirlpool ADG7550 11 flashes?

    As it fills all the water runs out on the floor so fill timeout /soaked wash pump occured. works now with new pump anyway.

    Regards
    S.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.